JJason Wangigb: RX payload guest writting refactoring
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
hw/ide/ahci: PxCI should not get cleared when ERR_STAT is set For NCQ, PxCI is cleared on command queued successfully. For non-NCQ, PxCI is cleared on command completed successfully. Successfully means ERR_STAT, BUSY and DRQ are all cleared. A command that has ERR_STAT set, does not get to clear PxCI. See AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and RegFIS:ClearCI, and 5.3.16.5 ERR:FatalTaskfile. In the case of non-NCQ commands, not clearing PxCI is needed in order for host software to be able to see which command slot that failed. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Message-id: 20230609140844.202795-7-nks@flawful.org Signed-off-by: John Snow <jsnow@redhat.com> | 2 年前 | |
hw/ide/ahci: PxCI should not get cleared when ERR_STAT is set For NCQ, PxCI is cleared on command queued successfully. For non-NCQ, PxCI is cleared on command completed successfully. Successfully means ERR_STAT, BUSY and DRQ are all cleared. A command that has ERR_STAT set, does not get to clear PxCI. See AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and RegFIS:ClearCI, and 5.3.16.5 ERR:FatalTaskfile. In the case of non-NCQ commands, not clearing PxCI is needed in order for host software to be able to see which command slot that failed. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Message-id: 20230609140844.202795-7-nks@flawful.org Signed-off-by: John Snow <jsnow@redhat.com> | 2 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest/libqos/e1000e: Export macreg functions They will be useful for igb testing. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> | 3 年前 | |
tests/qtest/libqos/e1000e: Export macreg functions They will be useful for igb testing. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> | 3 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests/qtest/libqos: Add generic pci host bridge in arm-virt machine Up to now the virt-machine node contains a virtio-mmio node. However no driver produces any PCI interface node. Hence, PCI tests cannot be run with aarch64 binary. Add a GPEX driver node that produces a pci interface node. This latter then can be consumed by all the pci tests. One of the first motivation was to be able to run the virtio-iommu-pci tests. We still face an issue with pci hotplug tests as hotplug cannot happen on the pcie root bus and require a generic root port. This will be addressed later on. We force cpu=max along with aarch64/virt machine as some PCI tests require high MMIO regions to be available. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20220504152025.1785704-4-eric.auger@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
igb: RX payload guest writting refactoring Refactoring is done in preparation for support of multiple advanced descriptors RX modes, especially packet-split modes. Signed-off-by: Tomasz Dzieciol <t.dzieciol@partner.samsung.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com> | 2 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: add G_GNUC_PRINTF for various functions Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20221219130205.687815-6-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 3 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: add G_GNUC_PRINTF for various functions Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20221219130205.687815-6-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 3 年前 | |
tests/qtest: Move mkimg() and have_qemu_img() from libqos to libqtest These two functions can be useful for other qtests beside the qos-test, too, so move them to libqtest instead. Message-Id: <20230704071655.75381-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: Move mkimg() and have_qemu_img() from libqos to libqtest These two functions can be useful for other qtests beside the qos-test, too, so move them to libqtest instead. Message-Id: <20230704071655.75381-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
Remove qemu-common.h include from most units Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
Remove qemu-common.h include from most units Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: enable tests for virtio-scmi We don't have a virtio-scmi implementation in QEMU and only support a vhost-user backend. This is very similar to virtio-gpio and we add the same set of tests, just passing some vhost-user messages over the control socket. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230628100524.342666-4-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 3 年前 | |
tests/x86: add helper qtest_qmp_device_del_send() Move sending 'device_del' command to separate function. Function can be used in case of addition action is needed to start actual removing device after sending command. Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com> Message-Id: <20220929223547.1429580-2-michael.labiuk@virtuozzo.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Fixed typo] Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest/libqos/pci: Introduce pio_limit At the moment the IO space limit is hardcoded to QPCI_PIO_LIMIT = 0x10000. When accesses are performed to a bar, the base address of this latter is compared against the limit to decide whether we perform an IO or a memory access. On ARM, we cannot keep this PIO limit as the arm-virt machine uses [0x3eff0000, 0x3f000000 ] for the IO space map and we are mandated to allocate at 0x0. Add a new flag in QPCIBar indicating whether it is an IO bar or a memory bar. This flag is set on QPCIBar allocation and provisionned based on the BAR configuration. Then the new flag is used in access functions and in iomap() function. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220504152025.1785704-2-eric.auger@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest/libqos/pci: Introduce pio_limit At the moment the IO space limit is hardcoded to QPCI_PIO_LIMIT = 0x10000. When accesses are performed to a bar, the base address of this latter is compared against the limit to decide whether we perform an IO or a memory access. On ARM, we cannot keep this PIO limit as the arm-virt machine uses [0x3eff0000, 0x3f000000 ] for the IO space map and we are mandated to allocate at 0x0. Add a new flag in QPCIBar indicating whether it is an IO bar or a memory bar. This flag is set on QPCIBar allocation and provisionned based on the BAR configuration. Then the new flag is used in access functions and in iomap() function. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220504152025.1785704-2-eric.auger@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
tests/qtest/libqos: Skip hotplug tests if pci root bus is not hotpluggable ARM does not not support hotplug on pcie.0. Add a flag on the bus which tells if devices can be hotplugged and skip hotplug tests if the bus cannot be hotplugged. This is a temporary solution to enable the other pci tests on aarch64. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220504152025.1785704-3-eric.auger@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests/: spelling fixes with some rewording in tests/qemu-iotests/298 tests/qtest/fuzz/generic_fuzz.c tests/unit/test-throttle.c as suggested by Eric. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Eric Blake <eblake@redhat.com> | 2 年前 | |
Fix several typos in documentation (found by codespell) Those typos are in files which are used to generate the QEMU manual. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20221110190825.879620-1-sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> [thuth: update sentence in can.rst as suggested by Peter] Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/: spelling fixes with some rewording in tests/qemu-iotests/298 tests/qtest/fuzz/generic_fuzz.c tests/unit/test-throttle.c as suggested by Eric. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Eric Blake <eblake@redhat.com> | 2 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
test: new qTest case to test the vhost-user-blk-server This test case has the same tests as tests/virtio-blk-test.c except for tests have block_resize. Since the vhost-user-blk export only serves one client one time, two exports are started by qemu-storage-daemon for the hotplug test. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210309094106.196911-3-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210322092327.150720-2-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> | 5 年前 | |
tests/9p: fix potential leak in v9fs_rreaddir() Free allocated directory entries in v9fs_rreaddir() if argument entries was passed as NULL, to avoid a memory leak. It is explicitly allowed by design for entries to be NULL. [1] [1] https://lore.kernel.org/all/1690923.g4PEXVpXuU@silver Reported-by: Coverity (CID 1487558) Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <E1psh5T-0002XN-1C@lizzy.crudebyte.com> | 3 年前 | |
tests/9p: merge v9fs_tunlinkat() and do_unlinkat() As with previous patches, unify those 2 functions into a single function v9fs_tunlinkat() by using a declarative function arguments approach. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Message-Id: <1dea593edd464908d92501933c068388c01f1744.1664917004.git.qemu_oss@crudebyte.com> | 3 年前 | |
tests: add G_GNUC_PRINTF for various functions Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20221219130205.687815-6-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 3 年前 | |
tests/9pfs: make create/remove test dir public Make functions create_local_test_dir() and remove_local_test_dir() public. They're going to be used in the next patch. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <ec90703cbc23d6b612b3672f946d7741f4a16080.1604243521.git.qemu_oss@crudebyte.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> | 5 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests/: spelling fixes with some rewording in tests/qemu-iotests/298 tests/qtest/fuzz/generic_fuzz.c tests/unit/test-throttle.c as suggested by Eric. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Eric Blake <eblake@redhat.com> | 2 年前 | |
tests/qtest: enable tests for virtio-gpio We don't have a virtio-gpio implementation in QEMU and only support a vhost-user backend. The QEMU side of the code is minimal so it should be enough to instantiate the device and pass some vhost-user messages over the control socket. To do this we hook into the existing vhost-user-test code and just add the bits required for gpio. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eric Auger <eric.auger@redhat.com> Message-Id: <20220408155704.2777166-1-alex.bennee@linaro.org> Message-Id: <20220802095010.3330793-23-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 3 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
tests: qtest: Add virtio-iommu test Add the framework to test the virtio-iommu-pci device and tests exercising the attach/detach, map/unmap API. Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20211127072910.1261824-5-eric.auger@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 4 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests/libqos: Move the libqos files under tests/qtest/ The qos stuff belongs to qtest, so move it into that directory, too. Message-Id: <20191218103059.11729-8-thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 6 年前 | |
tests/libqos: Move the libqos files under tests/qtest/ The qos stuff belongs to qtest, so move it into that directory, too. Message-Id: <20191218103059.11729-8-thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 6 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests/qtest: enable tests for virtio-scmi We don't have a virtio-scmi implementation in QEMU and only support a vhost-user backend. This is very similar to virtio-gpio and we add the same set of tests, just passing some vhost-user messages over the control socket. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230628100524.342666-4-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 3 年前 | |
tests/qtest: enable tests for virtio-scmi We don't have a virtio-scmi implementation in QEMU and only support a vhost-user backend. This is very similar to virtio-gpio and we add the same set of tests, just passing some vhost-user messages over the control socket. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230628100524.342666-4-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 3 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 | |
meson: convert tests/qtest to meson Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
tests/qtest: enable tests for virtio-gpio We don't have a virtio-gpio implementation in QEMU and only support a vhost-user backend. The QEMU side of the code is minimal so it should be enough to instantiate the device and pass some vhost-user messages over the control socket. To do this we hook into the existing vhost-user-test code and just add the bits required for gpio. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eric Auger <eric.auger@redhat.com> Message-Id: <20220408155704.2777166-1-alex.bennee@linaro.org> Message-Id: <20220802095010.3330793-23-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 3 年前 | |
tests/qtest: libqos: Rename malloc.h to libqos-malloc.h The qtest/libqos directory is included via the "-I" option to search for header files when building qtest. Unfortunately the malloc.h has a name conflict with the standard libc header, leading to a build failure on the Windows host, due to the MinGW libc stdlib.h header file includes malloc.h and it now gets wrongly pointed to the one in the qtest/libqos directory. Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to avoid the namespace pollution. Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
tests: move libqtest.h back under qtest/ Since commit a2ce7dbd917 ("meson: convert tests/qtest to meson"), libqtest.h is under libqos/ directory, while libqtest.c is still in qtest/. Move back to its original location to avoid mixing with libqos/. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> | 4 年前 |