| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
HID: i2c-hid: add more DRM dependencies When a symbol is selected that has extra dependencies, anything that selects it must have the same dependencies. With the added CONFIG_DRM reference from I2C_HID_CORE, this broke a couple of drivers that now also depend on DRM: WARNING: unmet direct dependencies detected for I2C_HID_CORE Depends on [m]: HID_SUPPORT [=y] && I2C_HID [=y] && (DRM [=m] || !DRM [=m]) Selected by [y]: - I2C_HID_OF [=y] && HID_SUPPORT [=y] && I2C_HID [=y] - I2C_HID_ACPI [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && ACPI [=y] - I2C_HID_OF_GOODIX [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && OF [=y] x86_64-linux-ld: vmlinux.o: in function i2c_hid_core_remove': (.text+0xfc8826): undefined reference to drm_panel_remove_follower' x86_64-linux-ld: vmlinux.o: in function i2c_hid_core_probe': (.text+0xfc8da0): undefined reference to drm_is_panel_follower' Add the corresponding DRM||!DRM dependencies on each one that is affected. Fixes: 96a37bfd232ae ("HID: i2c-hid: Support being a panel follower") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230802124947.1355415-1-arnd@kernel.org | 3 年前 | |
HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens Like many i2c-hid touchscreen controllers, the Elan eKTH6915 has a reset GPIO hooked up to it. According to the datasheet, the way we're supposed to turn the touchscreen on is: 1. Turn on the 3.3V supply. 2. Turn on the IO supply. It's OK if this is hardwired to the 3.3V supply, but if it's not then it must be turned on _after_ the 3.3V supply. 3. Wait >= 1 ms. 4. Deassert the reset GPIO (reset GPIO is active low, so there would be a leakage path if this was deasserted _before_ the IO supply). 5. Wait 300 ms. Much of the above can be handled by the generic i2c-hid-of driver, but the "reset" GPIO is not supported by that driver. Thus we'll do the same as we did for Goodix and add a new tiny driver that uses the i2c-hid core. NOTE: support for this new touchscreen could theorically fit into the Goodix driver. I've made it a separate driver because the Elan driver supports _two_ regulators and it's unclear exactly how that would fit in with commit 18eeef46d359 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator"). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 4 年前 | |
HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[] commit a9f68ffe1170ca4bc17ab29067d806a354a026e0 upstream. Users have reported problems with recent Lenovo laptops that contain an IDEA5002 I2C HID device. Reports include fans turning on and running even at idle and spurious wakeups from suspend. Presumably in the Windows ecosystem there is an application that uses the HID device. Maybe that puts it into a lower power state so it doesn't cause spurious events. This device doesn't serve any functional purpose in Linux as nothing interacts with it so blacklist it from being probed. This will prevent the GPIO driver from setting up the GPIO and the spurious interrupts and wake events will not occur. Cc: stable@vger.kernel.org # 6.1 Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl> Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2 年前 | |
HID: i2c-hid: improve i2c_hid_get_report error message stable inclusion from stable-6.6.87 commit 4c8865331899c2a5441b446d3bcd78c33cae4157 category: bugfix issue: #IC6IH3 CVE: NA Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> --------------------------------------- [ Upstream commit 723aa55c08c9d1e0734e39a815fd41272eac8269 ] We have two places to print "failed to set a report to ...", use "get a report from" instead of "set a report to", it makes people who knows less about the module to know where the error happened. Before: i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11 After: i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11 Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> | 1 年前 | |
HID: retain initial quirks set up when creating HID devices In certain circumstances, such as when creating I2C-connected HID devices, we want to pass and retain some quirks (axis inversion, etc). The source of such quirks may be device tree, or DMI data, or something else not readily available to the HID core itself and therefore cannot be reconstructed easily. To allow this, introduce "initial_quirks" field in hid_device structure and use it when determining the final set of quirks. This fixes the problem with i2c-hid setting up device-tree sourced quirks too late and losing them on device rebind, and also allows to sever the tie between hid-code and i2c-hid when applying DMI-based quirks. Fixes: b60d3c803d76 ("HID: i2c-hid-of: Expose the touchscreen-inverted properties") Fixes: a2f416bf062a ("HID: multitouch: Add quirks for flipped axes") Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Allen Ballway <ballway@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> | 3 年前 | |
HID: i2c-hid: elan: fix reset suspend current leakage stable inclusion from stable-6.6.34 commit 6d458d0dcca9a3cc573325acf35fcb0c9ad29422 category: bugfix issue: #IB7W7N CVE: NA Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> --------------------------------------- commit 0eafc58f2194dbd01d4be40f99a697681171995b upstream. The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s shares the VCC33 supply with other peripherals that may remain powered during suspend (e.g. when enabled as wakeup sources). The reset line is also wired so that it can be left deasserted when the supply is off. This is important as it avoids holding the controller in reset for extended periods of time when it remains powered, which can lead to increased power consumption, and also avoids leaking current through the X13s reset circuitry during suspend (and after driver unbind). Use the new 'no-reset-on-power-off' devicetree property to determine when reset needs to be asserted on power down. Notably this also avoids wasting power on machine variants without a touchscreen for which the driver would otherwise exit probe with reset asserted. Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens") Cc: <stable@vger.kernel.org> # 6.0 Cc: Douglas Anderson <dianders@chromium.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> | 1 年前 | |
Merge branch 'for-6.5/i2c-hid' into for-linus | 3 年前 | |
HID: i2c-hid-of: fix NULL-deref on failed power up commit 00aab7dcb2267f2aef59447602f34501efe1a07f upstream. A while back the I2C HID implementation was split in an ACPI and OF part, but the new OF driver never initialises the client pointer which is dereferenced on power-up failures. Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules") Cc: stable@vger.kernel.org # 5.12 Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2 年前 | |
HID: multitouch: Add quirks for flipped axes Certain touchscreen devices, such as the ELAN9034, are oriented incorrectly and report touches on opposite points on the X and Y axes. For example, a 100x200 screen touched at (10,20) would report (90, 180) and vice versa. This is fixed by adding device quirks to transform the touch points into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y. Signed-off-by: Allen Ballway <ballway@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 3 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 3 年前 | ||
| 4 年前 | ||
| 2 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 3 年前 |