* Copyright (C) 2021-2022 Huawei Device Co., Ltd.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef CELLULAR_CALL_DATA_STRUCT_H
#define CELLULAR_CALL_DATA_STRUCT_H
#include "call_manager_inner_type.h"
namespace OHOS {
namespace Telephony {
const int32_t INVALID_INDEX = -1;
const int32_t SS_FROM_MMI_CODE = 0;
const int32_t SS_FROM_SETTING_MENU = 1;
enum CLIRMode {
DEFAULT = 0,
TRANSFER = 1,
INHIBITION = 2,
};
struct DialRequestStruct {
std::string phoneNum = "";
CLIRMode clirMode = CLIRMode::DEFAULT;
};
struct ImsDialInfoStruct : public DialRequestStruct {
int32_t videoState = 0;
bool bEmergencyCall = false;
bool bImsCallFirst = false;
bool bRoaming = false;
bool isRTT = false;
};
enum MMIHandlerId {
EVENT_MMI_Id = 300,
EVENT_INQUIRE_MMI,
EVENT_SET_MMI,
EVENT_INQUIRE_CLIR_MMI,
EVENT_INQUIRE_CALL_FORWARD_MMI,
EVENT_SET_CALL_FORWARD_MMI,
EVENT_DEAL_USSD_MMI,
EVENT_SET_UNLOCK_PIN_PUK_ID,
};
* 3GPP TS 22.030 V4.0.0 (2001-03) 6.5.2 Structure of the MMI
* The following sequence of functions shall be used for the control of Supplementary Services:
* SELECT: Entry of the procedure information (may be a digit or a sequence of characters).
* SEND: Transmission of the information to the network.
* INDICATION: Call progress indications.
*/
struct MMIData {
std::string fullString = "";
std::string actionString = "";
std::string serviceCode = "";
std::string serviceInfoA = "";
std::string serviceInfoB = "";
std::string serviceInfoC = "";
std::string pwdString = "";
std::string dialString = "";
};
* 3GPP TS 22.030 V4.0.0 (2001-03)
* Tele- and Bearer Service Supplementary Information codes (SIb).
Alternate and speech/data services are included with the equivalent data service.
Basic Service
group number (note) Telecommunication Service MMI Service Code
1 to 12 All tele and bearer services no code required
Teleservices
1 to 6, 12 All teleservices 10
1 Telephony 11
2 to 6 All data teleservices 12
6 Facsimile services 13
2 Short Message Services 16
1, 3 to 6, 12 All teleservices except SMS 19
12 Voice group services
Voice Group Call Service (VGCS) 17
Voice Broadcast Service (VBS) 18
Bearer Service
7 to 11 All bearer services 20
7 All async services 21
8 All sync services 22
8 All data circuit sync 24
7 All data circuit async 25
13 All GPRS bearer services 99
*/
enum CFServiceCode {
ALL_TELE_SERVICES = 10,
TELE_SERVICES = 11,
ALL_DATA_TELE_SERVICES = 12,
FACSIMILE_SERVICES = 13,
SHORT_MESSAGE_SERVICES = 16,
ALL_TELE_SERVICES_EXCEPT_SMS = 19,
ALL_BEARER_SERVICES = 20,
ALL_ASYNC_SERVICES = 21,
ALL_SYNC_SERVICES = 22,
ALL_DATA_CIRCUIT_SYNC = 24,
ALL_DATA_CIRCUIT_ASYNC = 25,
ALL_GPRS_BEARER_SERVICES = 99,
};
* 27007-430_2001 7.11 Used for various supplementary services apis
*
* 3GPP TS 22.082 [4] Call forwarding number and conditions +CCFC
* 3GPP TS 22.083 [5] Call Waiting +CCWA
* 3GPP TS 22.088 [6] Facility lock +CLCK(for call barring)
*
* <classx> is a sum of integers each representing a class of information (default 7):
* 1 voice (telephony)
* 2 data (refers to all bearer services; with <mode>=2 this may refer only to some bearer service if TA does
not support values 16, 32, 64 and 128)
* 4 fax (facsimile services)
* 8 short message service
* 16 data circuit sync
* 32 data circuit async
* 64 dedicated packet access
* 128 dedicated PAD access
*/
enum ServiceClassType {
NONE = 0,
VOICE = 1,
FAX = 4,
SHORT_MESSAGE_SERVICE = 8,
DATA_CIRCUIT_SYNC = 16,
DATA_CIRCUIT_ASYNC = 32,
DEDICATED_PACKET_ACCESS = 64,
DEDICATED_PAD_ACCESS = 128,
};
* 3GPP TS 27.007 Vh.1.0 (2021-03) 8.74 List of current calls +CLCCS
* <neg_status>: integer type as defined in the +CCMMD command.
* 0 The parameter <neg_status> has no valid content. Parameter <SDP_md> is set to an empty string ("").
* 1 The <SDP_md> parameter describes the active media in the call.
* 2 The <SDP_md> parameter describes a proposed but not yet active new set of media for the call.
* 3 A proposed new set of media for the call was accepted by the remote party. The <SDP_md> parameter describes
* the active media in the call (if any).
* 4 A proposed new set of media for the call was rejected by the remote
* party. The <SDP_md> parameter describes the active media in the call (if any)
*/
enum NegStatus {
NEG_INVALID = 0,
NEG_ACTIVE = 1,
NEG_PROPOSE = 2,
NEG_ACCEPT = 3,
NEG_REJECT = 4,
};
* 3GPP TS 27.007 Vh.1.0 (2021-03) 8.74 List of current calls +CLCCS
* <cs_mode>: integer type (bearer/teleservice)
0 no relevant information about bearer/teleservice
1 voice
2 data
3 fax
4 voice followed by data, voice mode
5 alternating voice/data, voice mode
6 alternating voice/fax, voice mode
7 voice followed by data, data mode
8 alternating voice/data, data mode
9 alternating voice/fax, fax mode
255 unknown
*/
enum CsMode {
NO_INFORMATION = 0,
MODE_VOICE = 1,
MODE_DATA = 2,
MODE_FAX = 3,
VOICE_FOLLOWED_DATA = 4,
VOICE_DATA_ALTERNATE = 5,
VOICE_FAX_ALTERNATE = 6,
VOICE_FOLLOWED_DATA_MODE_DATA = 7,
VOICE_DATA_ALTERNATE_MODE_DATA = 8,
VOICE_FAX_ALTERNATE_MODE_FAX = 9,
UNKNOWN = 255,
};
* 3GPP TS 27.007 Vh.1.0 (2021-03) 8.74 List of current calls +CLCCS
* <ccstatus>: integer type. Indicating the state of the call.
1 Idle
2 Calling (MO); the call setup has been started
3 Connecting (MO); the call is in progress
4 Alerting (MO): an alert indication has been received
5 Alerting (MT); an alert indication has been sent
6 Active; the connection is established
7 Released; an outgoing (MO) call is released.
8 Released; an incoming (MT) call is released
9 User Busy
10 User Determined User Busy
11 Call Waiting (MO)
12 Call Waiting (MT)
13 Call Hold (MO)
14 Call Hold (MT)
*/
enum CCstatus {
IDLE = 1,
DIALING = 2,
CONNECTING = 3,
MO_ALERTING = 4,
MT_ALERTING = 5,
ACTIVE = 6,
MO_RELEASED = 7,
MT_RELEASED = 8,
USER_BUSY = 9,
USER_DETERMINED_USER_BUSY = 10,
MO_CALL_WAITING = 11,
MT_CALL_WAITING = 12,
MO_CALL_HOLD = 13,
MT_CALL_HOLD = 14,
};
* 3GPP TS 27.007 Vh.1.0 (2021-03) 8.74 List of current calls +CLCCS
* <dir>: integer type
0 mobile originated (MO) call
1 mobile terminated (MT) call
<neg_status_present>: integer type. Indicates whether parameter <neg_status> has any valid information.
0 No valid information in parameter <neg_status>. Parameter <neg_status> is set to zero.
1 Valid information in parameter <neg_status>
<SDP_md>: string type represented with IRA characters. SDP media description as per the +CDEFMP command. This
parameter shall not be subject to conventional character conversion as per +CSCS. This parameter will be an empty
string ("") if the call has no multimedia content
<mpty>: integer type
0 call is not one of multiparty (conference) call parties
1 call is one of multiparty (conference) call parties
<numbertype>: integer type. Indicating type of information in parameter <number>.
0 No valid information in parameter <number>
1 Number in <number> according to URI including the prefix specifying the URI type (see command +CDU). Parameter
<ton> has no relevant information and is set to zero. 2 Number in <number> according to one of the formats
supported by 3GPP TS 24.008 [8] subclause 10.5.4.7)
<ton>: type of number in integer format (refer 3GPP TS 24.008[8] subclause 10.5.4.7). The parameter is also set to
zero when it has no meaningful content, e.g. when <numbertype>=1.
<number>: string type phone number in format specified by <numbertype>. This parameter shall not be subject to
conventional character conversion as per +CSCS.
<priority_present>: integer type. Indicates whether parameter <priority> has any valid information.
0 No valid information in parameter <priority>. Parameter
<priority> is set to zero.
1 Valid information in parameter <priority>.
<priority>: integer type parameter
indicating the eMLPP priority level of the call, values specified in 3GPP TS 22.067 [54].
<CLI_validity_present>: integer type. Indicates whether parameter <CLI_validity> has any valid information.
0 No valid information in parameter <CLI_validity>. Parameter <priority> is set to zero.
1 Valid information in parameter <CLI_validity>
*/
struct ImsCallInfoResponse {
int32_t index = 0;
bool mt = false;
bool negStatusPresent = false;
NegStatus negStatus = NegStatus::NEG_INVALID;
char sdpMd[kMaxNumberLen] = { 0 };
CsMode csMode = CsMode::NO_INFORMATION;
TelCallState state = TelCallState::CALL_STATUS_UNKNOWN;
bool mpty = false;
int32_t numberType = 0;
int32_t ton = 0;
char number[kMaxNumberLen] = { 0 };
bool priorityPresent = false;
int32_t priority = 0;
bool cliValidityPresent = false;
CallType callType = CallType::TYPE_CS;
int32_t videoState = 0;
};
struct PinPukResponse {
int32_t result = 0;
int32_t remain = 0;
};
enum ImsHandleId {
IMS_RADIO_CALL_STATE = 2001,
IMS_RADIO_AVAIL,
IMS_RADIO_NOT_AVAIL,
IMS_RADIO_CURRENT_CALLS,
};
struct SsRequestCommand {
int32_t cfAction = 0;
int32_t cfReason = 0;
std::string number = "";
bool enable = false;
int32_t clirAction = 0;
std::string facility = "";
char password[kMaxNumberLen + 1] = { 0 };
int32_t classType = 0;
int32_t action = 0;
int32_t flag = SS_FROM_MMI_CODE;
};
enum PostDialCallState {
POST_DIAL_CALL_NOT_STARTED = 0,
POST_DIAL_CALL_STARTED,
POST_DIAL_CALL_DELAY,
POST_DIAL_CALL_WILD,
POST_DIAL_CALL_COMPLETE,
POST_DIAL_CALL_CANCELED,
POST_DIAL_CALL_PAUSE,
};
enum DtmfHandlerId {
EVENT_EXECUTE_POST_DIAL = 600,
};
struct PostDialData {
int32_t callId = 0;
bool isIms = false;
};
}
}
#endif
