| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
dt-bindings: net: can: Add support for Allwinner D1 CAN controller The Allwinner D1 has two CAN controllers, both a variant of the R40 controller. Unfortunately the registers for the D1 controllers are moved around enough to be incompatible and require a new compatible. Introduce the "allwinner,sun20i-d1-can" compatible to support this. Signed-off-by: John Watts <contact@jookia.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/20230721221552.1973203-3-contact@jookia.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 | |
dt-bindings: atmel-can: add microchip,sam9x60-can Add microchip,sam9x60-can to DT bindings documentation. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1578673089-3484-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> | 6 年前 | |
dt-bindings: drop redundant part of title (end) The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop trailing "Devicetree bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM devicetree updates from Arnd Bergmann: "These are the devicetree updates for Arm and RISC-V based SoCs, mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and Starfive. Only a few new SoC got added: - TI AM62P5, a variant of the existing Sitara AM62x family - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55 SoC. - Qualcomm ipq5018 is used in wireless access points - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone platform. In total, 29 machines get added, which is low because of the summer break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST, Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of these are development and reference boards. Despite not adding a lot of new machines, there are over 700 patches in total, most of which are cleanups and minor fixes" * tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits) arm64: dts: use capital "OR" for multiple licenses in SPDX ARM: dts: use capital "OR" for multiple licenses in SPDX arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved ARM: dts: qcom: apq8064: add support to gsbi4 uart riscv: dts: change TH1520 files to dual license riscv: dts: thead: add BeagleV Ahead board device tree dt-bindings: riscv: Add BeagleV Ahead board compatibles ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs ARM: dts: stm32: support display on stm32f746-disco board ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: add ltdc support on stm32f746 MCU arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM arm64: dts: qcom: sdm670: Add PDC riscv: dts: starfive: fix jh7110 qspi sort order ... | 2 年前 | |
dt-bindings: drop redundant part of title of shared bindings The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. For shared (re-usable) schemas, name them all as "common properties". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> # watchdog Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Vinod Koul <vkoul@kernel.org> # dma Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # opp Link: https://lore.kernel.org/r/20221216163815.522628-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: drop redundant part of title (end, part three) The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: Fix typos Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: drop redundant part of title (end) The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop trailing "Devicetree bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: can: fsl,flexcan: add optional power-domains property Add optional power-domains property for i.MX8 usage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/20230328054602.1974255-1-peng.fan@oss.nxp.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 | |
can: grcan: Add device driver for GRCAN and GRHCAN cores This driver supports GRCAN and CRHCAN CAN controllers available in the GRLIB VHDL IP core library. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 13 年前 | |
can: hi311x: Use level-triggered interrupt If the hi3110 shares the SPI bus with another traffic-intensive device and packets are received in high volume (by a separate machine sending with "cangen -g 0 -i -x"), reception stops after a few minutes and the counter in /proc/interrupts stops incrementing. Bus state is "active". Bringing the interface down and back up reconvenes the reception. The issue is not observed when the hi3110 is the sole device on the SPI bus. Using a level-triggered interrupt makes the issue go away and lets the hi3110 successfully receive 2 GByte over the course of 5 days while a ks8851 Ethernet chip on the same SPI bus handles 6 GByte of traffic. Unfortunately the hi3110 datasheet is mum on the trigger type. The pin description on page 3 only specifies the polarity (active high): http://www.holtic.com/documents/371-hi-3110_v-rev-kpdf.do Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Akshay Bhat <akshay.bhat@timesys.com> Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 7 年前 | |
can: ifi: Add DT bindings for ifi,canfd Add device tree bindings for the I/F/I CANFD controller IP core. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 10 年前 | |
dt-bindings: can: mcp251x: document GPIO support The next patch adds gpio controller support to the mcp251x driver. This patch updates the binding accordingly. Cc: Timo Schlüßler <schluessler@krause.de> Link: https://lore.kernel.org/r/20200915223527.1417033-26-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 5 年前 | |
dt-bindings: Fix SPI and I2C bus node names in examples SPI and I2C bus node names are expected to be "spi" or "i2c", respectively, with nothing else, a unit-address, or a '-N' index. A pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these cases. Mostly scripted with the following commands: git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' With this, a few errors in examples were exposed and fixed. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: can: mpfs: document the mpfs CAN controller Add a binding for the CAN controller on PolarFire SoC (MPFS). A data sheet and a register map can be downloaded at: | https://www.microsemi.com/document-portal/doc_download/1245725-polarfire-soc-fpga-mss-technical-reference-manual | https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map An alternative location for the register map is: | http://web.archive.org/web/20220403030214/https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map Link: https://lore.kernel.org/all/20220607065459.2035746-2-conor.dooley@microchip.com Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> [mkl: add link to data sheet and register map] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 4 年前 | |
dt: Move device tree documentation out of powerpc directory The device tree is used by more than just PowerPC. Make the documentation directory available to all. v2: reorganized files while moving to create arch and driver specific directories. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> | 15 年前 | |
dt-bindings: net: can: nxp,sja1000: drop ref from reg-io-width reg-io-width is a standard property, so no need for defining its type Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/20220823101011.386970-1-krzysztof.kozlowski@linaro.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 | |
dt-bindings: can: Add bindings for Phytium CAN This patch documents the DT bindings for Phytium CAN controller. Signed-off-by: yuanxia <yuanxia2073@phytium.com.cn> Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn> Signed-off-by: Wang Yinfeng <wangyinfeng@phytium.com.cn> | 1 年前 | |
dt-bindings: can: rcar_can: Convert to json-schema Convert the Renesas R-Car CAN Controller Device Tree binding documentation to json-schema. Document missing properties. Update the example to match reality. Link: https://lore.kernel.org/r/561c35648e22a3c1e3b5477ae27fd1a50da7fe98.1620323639.git.geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 5 年前 | |
dt-bindings: can: renesas,rcar-canfd: Add transceiver support Add support for describing CAN transceivers as PHYs. While simple CAN transceivers can do without, this is needed for CAN transceivers like NXP TJR1443 that need a configuration step (like pulling standby or enable lines), and/or impose a bitrate limit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/1bd328b5c9c6cfa633b42af87550f4c7358a05c1.1674499048.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 | |
dt-bindings: net: can: add "st,can-secondary" property On the stm32f7 Socs the can peripheral can be in single or dual configuration. In the dual configuration, in turn, it can be in primary or secondary mode. The addition of the 'st,can-secondary' property allows you to specify this mode in the dual configuration. CAN peripheral nodes in single configuration contain neither "st,can-primary" nor "st,can-secondary". Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/20230427204540.3126234-2-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 | |
dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants These two new chips do not have state or wake pins. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/all/20230728141923.162477-2-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 | |
can: ti_hecc: Add TI HECC DT binding documentation DT binding documentation for TI High End CAN Controller Signed-off-by: Anton Glukhov <anton.a.glukhov@gmail.com> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 9 年前 | |
dt-bindings: can: xilinx_can: Add reset description IP core has input for reset signal which can be connected that's why describe optional reset property. Signed-off-by: Michal Simek <michal.simek@amd.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/all/bfaed896cc51af02fe5f290675313ab4dcab0d33.1689164442.git.michal.simek@amd.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 3 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 13 年前 | ||
| 7 年前 | ||
| 10 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 15 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 9 年前 | ||
| 3 年前 |