| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
tests/tcg: clean-up gdb confirm/pagination settings We can do this all in the run-test.py script so remove the extraneous bits from the individual tests which got copied from the original non-CI gdb tests. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230829161528.2707696-8-alex.bennee@linaro.org> | 2 年前 | |
target/arm: Handle overflow in calculation of next timer tick In commit edac4d8a168 back in 2015 when we added support for the virtual timer offset CNTVOFF_EL2, we didn't correctly update the timer-recalculation code that figures out when the timer interrupt is next going to change state. We got it wrong in two ways: * for the 0->1 transition, we didn't notice that gt->cval + offset can overflow a uint64_t * for the 1->0 transition, we didn't notice that the transition might now happen before the count rolls over, if offset > count In the former case, we end up trying to set the next interrupt for a time in the past, which results in QEMU hanging as the timer fires continuously. In the latter case, we would fail to update the interrupt status when we are supposed to. Fix the calculations in both cases. The test case is Alex Bennée's from the bug report, and tests the 0->1 transition overflow case. Fixes: edac4d8a168 ("target-arm: Add CNTVOFF_EL2") Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
target/arm: Handle overflow in calculation of next timer tick In commit edac4d8a168 back in 2015 when we added support for the virtual timer offset CNTVOFF_EL2, we didn't correctly update the timer-recalculation code that figures out when the timer interrupt is next going to change state. We got it wrong in two ways: * for the 0->1 transition, we didn't notice that gt->cval + offset can overflow a uint64_t * for the 1->0 transition, we didn't notice that the transition might now happen before the count rolls over, if offset > count In the former case, we end up trying to set the next interrupt for a time in the past, which results in QEMU hanging as the timer fires continuously. In the latter case, we would fail to update the interrupt status when we are supposed to. Fix the calculations in both cases. The test case is Alex Bennée's from the bug report, and tests the 0->1 transition overflow case. Fixes: edac4d8a168 ("target-arm: Add CNTVOFF_EL2") Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/60 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20231120173506.3729884-1-peter.maydell@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
target/arm: Fix SVE STR increment The previous change missed updating one of the increments and one of the MemOps. Add a test case for all vector lengths. Cc: qemu-stable@nongnu.org Fixes: e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231031143215.29764-1-richard.henderson@linaro.org [PMM: fixed checkpatch nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
tests/tcg/aarch64: Rename bti-crt.inc.c -> bti-crt.c.inc Since commit 139c1837db ("meson: rename included C source files to .c.inc"), QEMU standard procedure for included C files is to use *.c.inc. Besides, since commit 6a0057aa22 ("docs/devel: make a statement about includes") this is documented as the Coding Style: If you do use template header files they should be named with the .c.inc or .h.inc suffix to make it clear they are being included for expansion. Therefore rename 'bti-crt.inc.c' as 'bti-crt.c.inc'. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230606141252.95032-6-philmd@linaro.org> | 2 年前 | |
tests/tcg/aarch64: Add bti smoke tests The note test requires gcc 10 for -mbranch-protection=standard. The mmap test uses PROT_BTI and does not require special compiler support. Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201021173749.111103-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
tests/tcg/aarch64: Rename bti-crt.inc.c -> bti-crt.c.inc Since commit 139c1837db ("meson: rename included C source files to .c.inc"), QEMU standard procedure for included C files is to use *.c.inc. Besides, since commit 6a0057aa22 ("docs/devel: make a statement about includes") this is documented as the Coding Style: If you do use template header files they should be named with the .c.inc or .h.inc suffix to make it clear they are being included for expansion. Therefore rename 'bti-crt.inc.c' as 'bti-crt.c.inc'. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230606141252.95032-6-philmd@linaro.org> | 2 年前 | |
tests/tcg/aarch64: Rename bti-crt.inc.c -> bti-crt.c.inc Since commit 139c1837db ("meson: rename included C source files to .c.inc"), QEMU standard procedure for included C files is to use *.c.inc. Besides, since commit 6a0057aa22 ("docs/devel: make a statement about includes") this is documented as the Coding Style: If you do use template header files they should be named with the .c.inc or .h.inc suffix to make it clear they are being included for expansion. Therefore rename 'bti-crt.inc.c' as 'bti-crt.c.inc'. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230606141252.95032-6-philmd@linaro.org> | 2 年前 | |
tests/tcg/aarch64: add DC CVA[D]P tests Test execution of DC CVAP and DC CVADP instructions under user mode emulation. Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 3 年前 | |
tests/tcg/aarch64: add DC CVA[D]P tests Test execution of DC CVAP and DC CVADP instructions under user mode emulation. Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 3 年前 | |
tests/tcg/arm: add fcvt test cases for AArch32/64 This runs through the usual float to float conversions and crucially also runs with ARM Alternative Half Precision Format. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> | 8 年前 | |
tests/tcg: add float_convd test This is a simple transliteration of the float_convs test but this time working with doubles. I'm used it to test the handling of vector registers in gdbstub but wasn't able to find a non-ugly way to automate it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220419091020.3008144-23-alex.bennee@linaro.org> | 4 年前 | |
tests/tcg: add generic version of float_convs This is broadly similar to the existing fcvt test for ARM but using the generic float testing framework. We should be able to pare down the ARM fcvt test case to purely half-precision with or without the Alt HP provision. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> | 6 年前 | |
tests/tcg: add float_madds test to multiarch This is a generic floating point multiply and accumulate test for single precision floating point values. I've split of the common float functions into a helper library so additional tests can use the same common code. As I don't have references for all architectures I've allowed some flexibility for tests to pass without reference files. They can be added as we get collect them. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> | 6 年前 | |
accel/tcg: Avoid reading too much in load_atom_{2,4} When load_atom_extract_al16_or_al8 is inexpensive, we want to use it early, in order to avoid the overhead of required_atomicity. However, we must not read past the end of the page. If there are more than 8 bytes remaining, then both the "aligned 16" and "aligned 8" paths align down so that the read has at least 16 bytes remaining on the page. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
tests/tcg/aarch64: Add mte smoke tests Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
tests/tcg/aarch64: Add mte smoke tests Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
tests/tcg/aarch64: Add mte smoke tests Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
tests/tcg/aarch64: Add mte smoke tests Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
test/tcg/aarch64: Add mte-5 Buglink: https://bugs.launchpad.net/bugs/1921948 Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210416183106.1516563-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
accel/tcg: Preserve PAGE_ANON when changing page permissions Using mprotect() to change PROT_* does not change the MAP_ANON previously set with mmap(). Our linux-user version of MTE only works with MAP_ANON pages, so losing PAGE_ANON caused MTE to stop working. Reported-by: Stephen Long <steplong@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
tests/tcg/aarch64: Use stz2g in mte-7.c We have many other instances of stg in the testsuite; change these to provide an instance of stz2g. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230530191438.411344-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 3 年前 | |
accel/tcg: Preserve PAGE_ANON when changing page permissions Using mprotect() to change PROT_* does not change the MAP_ANON previously set with mmap(). Our linux-user version of MTE only works with MAP_ANON pages, so losing PAGE_ANON caused MTE to stop working. Reported-by: Stephen Long <steplong@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
tests/tcg/aarch64: Add newline in pauth-1 printf Make the output just a bit prettier when running by hand. Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200229012811.24129-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 6 年前 | |
tests/tcg/aarch64: Adjust pauth tests for FEAT_FPAC With FEAT_FPAC, AUT* instructions that fail authentication do not produce an error value but instead fault. For pauth-2, install a signal handler and verify it gets called. For pauth-4 and pauth-5, we are explicitly testing the error value, so there's nothing to test with FEAT_FPAC, so exit early. Adjust the makefile to use -cpu neoverse-v1, which has FEAT_EPAC but not FEAT_FPAC. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
tests/tcg/aarch64: Adjust pauth tests for FEAT_FPAC With FEAT_FPAC, AUT* instructions that fail authentication do not produce an error value but instead fault. For pauth-2, install a signal handler and verify it gets called. For pauth-4 and pauth-5, we are explicitly testing the error value, so there's nothing to test with FEAT_FPAC, so exit early. Adjust the makefile to use -cpu neoverse-v1, which has FEAT_EPAC but not FEAT_FPAC. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
tests/tcg/aarch64: Adjust pauth tests for FEAT_FPAC With FEAT_FPAC, AUT* instructions that fail authentication do not produce an error value but instead fault. For pauth-2, install a signal handler and verify it gets called. For pauth-4 and pauth-5, we are explicitly testing the error value, so there's nothing to test with FEAT_FPAC, so exit early. Adjust the makefile to use -cpu neoverse-v1, which has FEAT_EPAC but not FEAT_FPAC. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
tests/tcg/aarch64: Adjust pauth tests for FEAT_FPAC With FEAT_FPAC, AUT* instructions that fail authentication do not produce an error value but instead fault. For pauth-2, install a signal handler and verify it gets called. For pauth-4 and pauth-5, we are explicitly testing the error value, so there's nothing to test with FEAT_FPAC, so exit early. Adjust the makefile to use -cpu neoverse-v1, which has FEAT_EPAC but not FEAT_FPAC. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230829232335.965414-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
tests/tcg: Add arm and aarch64 pc alignment tests Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 4 年前 | |
semihosting: move semihosting tests to multiarch It may be arm-compat-semihosting but more than one architecture uses it so lets move the tests into the multiarch area. We gate it on the feature and split the semicall.h header between the arches. Also clean-up a bit of the Makefile messing about to one common set of runners. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org> | 5 年前 | |
arm: spelling fixes Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> | 3 年前 | |
tests/tcg/aarch64: add SVE iotcl test This is a fairly bare-bones test of setting the various vector sizes for SVE which will only fail if the PR_SVE_SET_VL can't reduce the user-space vector length by powers of 2. However we will also be able to use it in a future test which exercises the GDB stub. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200316172155.971-25-alex.bennee@linaro.org> | 6 年前 | |
target/arm: Fix SVE STR increment The previous change missed updating one of the increments and one of the MemOps. Add a test case for all vector lengths. Cc: qemu-stable@nongnu.org Fixes: e6dd5e782be ("target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231031143215.29764-1-richard.henderson@linaro.org [PMM: fixed checkpatch nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
target/arm: Update user-mode ID reg mask values For user-only mode we reveal a subset of the AArch64 ID registers to the guest, to emulate the kernel's trap-and-emulate-ID-regs handling. Update the feature bit masks to match upstream kernel commit a48fa7efaf1161c1c. None of these features are yet implemented by QEMU, so this doesn't yet have a behavioural change, but implementation of FEAT_MOPS and FEAT_HBC is imminent. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/arm: Fix sve2 ldnt1 and stnt1 For both ldnt1 and stnt1, the meaning of the Rn and Rm are different from ld1 and st1: the vector and integer registers are reversed, and the integer register 31 refers to XZR instead of SP. Secondly, the 64-bit version of ldnt1 was being interpreted as 32-bit unpacked unscaled offset instead of 64-bit unscaled offset, which discarded the upper 32 bits of the address coming from the vector argument. Thirdly, validate that the memory element size is in range for the vector element size for ldnt1. For ld1, we do this via independent decode patterns, but for ldnt1 we need to do it manually. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/826 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220308031655.240710-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 4 年前 | |
tests/multiarch: Add test-aes Use a shared driver and backends for i386, aarch64, ppc64, riscv64. Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 3 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 6 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 3 年前 |